Compliance
ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 High Intensity Type A Obstruction Light
FAA L-856
Features
Electrical
CREE ultra high intensity LED as light source saving power
Power supply available in DC(48V) or AC(110V, 240V)
Physical
Unique design and UV protected polycarbonate lens for converging light and saving LED power
UV protection Powder coated bright yellow color base make better visibility
Base material is powder coated die-casting aluminum which has strong corrosion resistance, Shock and Vibrations protection
Special valve installed beside the base to make sure the air could go through but water is avoid, so that the whole light temperature won’t be high to destroy the light
System design
Built-in photocell for day/twilight/night operation
Surge and lightning protection
Optional
Alarm contact for remote monitoring
Infrared LED for pilot using NVG
GSM cellphone monitoring
RS485 communication part for monitoring
User adjustable flashing rate(40, 50, 60 flashes/minute)
GPS synchronization
Application
AH-HI-A1 High-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is more than 150meter, and most time work with low intensity aircraft warning lights & medium intensity aircraft warning light installed on the lower place.
SPECIFICATIONS | AH-HI-A1 High-intensity Type A L856 Aviation Obstruction Light |
Light Characteristics | |
Light Source | CREE high intensity LED |
Available Colors | White |
Intensity(cd) | ≥200,000cd(Daytime) |
≥20,000cd(Twilight) | |
≥2,000cd(Night) | |
Horizontal Output(degrees) | 360 |
Vertical Divergence (degrees) | 3-7 |
Flash Characteristics | 40-60 flashes per minute |
Operation Mode | 24hours operation, 3 different modes |
LED Life Experience(hours) | >100,000 |
Electrical Characteristics | |
Operating Voltage | DC(48VDC) or AC(110, 240V) |
Average Power(W) | 40W |
Circuit Protection | Integrated |
Physical Characteristics | |
Body Material | Polycarbonate (Tempered glass as optional) |
SPECIFICATIONS | AH-HI-A1 High-intensity Type A L856 Aviation Obstruction Light |
Base Material | Powder coated die-casting aluminum |
Mounting | θ190×θ12 |
Dimension(mm) | 236×236×430 |
Weight(kg) | 9 |
Product Life Expectancy | 5 years Plus |
Environmental Factors | |
Humidity | 0%-100% |
Wind Speed | 80m/s |
Waterproof | IP67 |
Compliance | |
ICAO | Annex 14 Volume 1,'Aerodrome Design and Operations’ Sixth edition 2016, table 6.3 High-intensity Type A White Obstacle Light |
FAA | L-856 |
Options Available | |
GPS Sync Flashing | NVG(Night Vision Goggles) compatible LED |
Dry Contact alarm (NO COM NC) | GSM Monitoring |
User adjustable flashing rate (40, 50, 60) | / |
Anhang Technology(HK) Company Limited
all rights reserved © ICP:12060043